Sodium Aluminate solution is widely used in the water and wastewater
treatment markets. As an aluminum based coagulant manufactured as an
alkaline (caustic) based solution, Sodium Aluminate offers advantages in
systems where maintaining pH at a higher level is important. Unlike
acid based metal salt coagulants, Sodium Aluminate will not reduce
system alkalinity.
Product quality is ensured by managing each phase of manufacturing, from
raw materials through finished product. Engineering, manufacturing, and
quality assurance personnel maintain strict controls throughout the
manufacturing process. This assures you consistent product quality and
performance. Refer to the msds for more information.
Sodium Aluminate Solutions Specs:
The YMALCO manufacturing process utilizes only the finest available raw
materials in the production of YMALCO Sodium Aluminate Solutions, in
which alumina tri-hydrate (ATH) is dissolved into sodium hydroxide and
water. Proprietary stabilization techniques may also be used to prevent
alumina from precipitating. YMALCO Sodium Aluminate Solutions are
colorless, odorless, tasteless, strongly alkaline solutions that are
available in three strengths:
EN_YT_MSDS
Sodium Aluminate Solution (20%) TECHNICAL DATA SHEET (PDF)
Sodium Aluminate Solution (23%) TECHNICAL DATA SHEET (PDF)
Sodium Aluminate Solution (25%) TECHNICAL DATA SHEET (PDF)
Sodium Aluminate Solution Safety Data Sheet
Sodium Aluminate Solution Storage & Handling Sheet